Rawuser / Install

How do I add Rawuser to a Lovable site?

Short answer

Send one message in Lovable's chat asking it to put the tag first inside <head>, the way people add Google Analytics by hand, then publish.

Projects created since 13 May 2026 render on the server and need a different message from older ones. Any Lovable plan can make the change; Lovable lists invite-only publishing on its free plan and custom domains from Pro.

Last checked 25 October 2026 · Agshin Rajabov, founder of Rawuser

Add Rawuser to Lovable, step by step

Not sure? Ask Lovable in the chat: What stack is this project on? React and Vite means older, TanStack Start means new.

  1. Copy your tag

    Sign up for the pilot and open the Connect screen. Your tag carries your own ID where this one says YOUR-ID.

    Your tag
    <script data-cfasync="false" src="https://edge.userawuser.com/s/YOUR-ID.js"></script>
    Your real ID is on the Connect screen.
  2. Older project: send this message

    Paste it into Lovable's chat with your own tag in it.

    Add this script as the first line inside <head> in index.html, exactly as written, without async or defer:

    <script data-cfasync="false" src="https://edge.userawuser.com/s/YOUR-ID.js"></script>
    Build
    Replace YOUR-ID first.

    Illustration in the Lovable style, not a screenshot.

  3. New project: send this message

    Paste it into Lovable's chat with your own tag in it.

    Add this script as the first tag inside the <head> of every public page, in the HTML the server sends, exactly as written, without async or defer. Use a plain script tag, not code that adds it after the page loads:

    <script data-cfasync="false" src="https://edge.userawuser.com/s/YOUR-ID.js"></script>
    Build
    Replace YOUR-ID first.

    Illustration in the Lovable style, not a screenshot.

  4. Publish

    Publish when Lovable is done. The tag reaches visitors only on the published site.

  5. Check it

    Open the published page once. Within ten seconds the Connect screen says Tag found. On a new project, also look for the tag near the top of the page source.

    view-source:your-site
    <head>
    <script data-cfasync="false" src="…/s/YOUR-ID.js"></script>
    <meta charset="UTF-8">
    <title>…</title>

Which kind of Lovable project do I have?

Projects created since 13 May 2026 run on TanStack Start and render on the server; older ones are React and Vite apps that render in the browser.

If you are not sure, Lovable's docs say to ask it in the chat: What stack is this project on?

An older project stays on React and Vite until you upgrade it to TanStack Start.

KindCreatedHow pages renderWhere the tag goes
OlderBefore 13 May 2026In the browser; crawlers get a prerendered copyFirst inside <head> in index.html
NewSince 13 May 2026 (Enterprise: 22 June 2026)On the server, with TanStack StartFirst in the head of every page the server sends

Where does the tag go in an older Lovable project?

First inside <head> in index.html, exactly as written, without async or defer.

That file is the shell every page loads, so one line reaches every page.

Our own Lovable test project is this kind. On 14 September 2026, with the tag there, the hero stayed hidden for 196 to 488 ms until the new words were in. The original text never showed.

Where does the tag go in a new Lovable project?

In the head of every page as the server sends it. Lovable's docs name no file for this, so ask Lovable to place it.

TanStack Start's own docs set the head for the whole app on the root route. Ask Lovable for a plain script tag there, first in the head.

Code that adds the tag after the page loads comes too late. A page drawn before the tag runs stays as you built it for that visit.

Our test project is an older one, so on a new project check the page source after you publish (step 6).

Is this like adding Google Analytics to Lovable?

Yes. Both are a script in the page head, asked for in the chat.

Lovable now has a Google Analytics connector that sets the measurement ID for you. Rawuser has no Lovable connector, so you send the message yourself, as the third-party guides for adding Google Analytics to Lovable do.

If your head already holds an analytics script, the Rawuser tag goes above it.

Does it work when Lovable changes pages without reloading?

Yes. The tag follows those page changes by itself, with no extra code.

Lovable sites move between pages without a full reload. The tag notices each route change and reads the new page.

Does it slow my Lovable site or change its SEO?

Only the lines Rawuser rewrites wait, usually a fraction of a second, and search engines get the page as built.

If the answer is late, your original stays. The rest of the page draws as usual.

Search engines and AI crawlers are served the page as you built it. The server rendering of a new project, or the crawler copy of an older one, stays what Lovable made.

Does a security policy block the tag on Lovable?

Not on a lovable.app address. Our test site there sends no Content-Security-Policy (checked 25 October 2026).

If you or Lovable added a policy, it needs https://edge.userawuser.com in script-src and connect-src. The Connect screen reads your policy and shows the exact lines.

How do I check it works?

Open the published page once, and within ten seconds the Connect screen says Tag found.

On a new project, also open the page source in your browser. Look for edge.userawuser.com near the top of <head>. If it is not there, the tag is added after the page loads; ask Lovable to move it into the head the server sends.

An older install loads snippet.js with async. The Connect screen flags it and asks you to swap it for the tag on this page.

Sources

  1. Lovable blog, Building apps using TanStack Start read 25 October 2026
  2. Lovable docs, Upgrade a project to TanStack Start read 25 October 2026
  3. Lovable docs, Optimize your app for SEO and AI search read 25 October 2026
  4. Lovable docs, Google Analytics read 25 October 2026
  5. Lovable, Pricing read 25 October 2026
  6. TanStack Router docs, Document head management read 25 October 2026

Related questions

Start your pilot

See it on your site.

Free for 30 days. Leave your email and your page; we reply within a day with what your own page would say to a visitor from ChatGPT.

We use your email only to reply. Privacy

What happens next

  1. 01

    Within a day, your own page.

    What it would say to a visitor from ChatGPT, written from your page.

  2. 02

    We set it up with you.

    You see your page and its first version before anything goes live.

  3. 03

    Day 31, you decide.

    Keep it from $99 a month, or stop and owe nothing.