Rawuser / Install

How do I add Rawuser to a Framer site?

Short answer

In Framer, open Site settings, then Code, and click Add script.

Paste the tag, set Placement to Start of <head>, Page to All and Run to Once, then click Add and publish. In our own install on 25 October 2026, on a free site at a framer.app address, Framer asked for no upgrade.

Last checked 25 October 2026 · Agshin Rajabov, founder of Rawuser

Add Rawuser to Framer, step by step

  1. Copy your tag

    Sign up for the pilot and open the Connect screen. Your tag carries your own ID where this one says YOUR-ID.

    Your tag
    <script data-cfasync="false" src="https://edge.userawuser.com/s/YOUR-ID.js"></script>
    Your real ID is on the Connect screen.
  2. Open Site settings, Code

    In the Framer editor, open the menu at the top left, then Settings. Under Site settings, choose Code and click Add script.

  3. Fill in the Add script dialog

    Name it Rawuser. Set Placement to Start of <head>, Page to All and Run to Once. Paste the tag into Code, exactly as written, and click Add.

    Add script

    Name

    Rawuser

    Placement

    Start of <head>

    Page

    All

    Run

    Once

    Code

    <script data-cfasync="false" src="https://edge.userawuser.com/s/YOUR-ID.js"></script>
    CancelAdd

    Illustration in the Framer style, not a screenshot.

  4. Publish

    Click Publish, then Update. The tag goes live only on the published site.

  5. Look at the page source

    Open the published page and its source. The tag sits right after <!-- Start of headStart -->, near the top of <head>.

    view-source:your-site
    <head>
    <script data-cfasync="false" src="…/s/YOUR-ID.js"></script>
    <meta charset="UTF-8">
    <title>…</title>
  6. Check it

    Open the published page once. Within seconds the Connect screen says Tag found.

    Rawuser · Connect

    Tag runs on your-site.com.Your page reached Rawuser.

How do I add custom code in Framer?

Open the menu at the top left, then Settings, then Code under Site settings, and click Add script.

The Code page says custom code can go on all or some pages of the published site. Add script opens a dialog with five fields: Name, Placement, Page, Run and Code.

Framer's help names the same place differently. Its custom code article says Project Settings and a Custom Code tab, and its Learn page says Site Settings, Custom Code (both read 25 October 2026). The names above are what the editor showed us that day.

To load a script on one page only, Framer's Learn page points to that page's own settings. For Rawuser, keep Page on All. If your site has signed-in pages, leave them out.

FieldWhat to set
NameRawuser
PlacementStart of <head> (the default is End of <body>)
PageAll
RunOnce
CodeYour tag, exactly as written

Does Framer allow custom code on the free plan?

On our own free site it did. No upgrade prompt appeared, and the tag runs on its framer.app address.

We made a new project on the free plan on 25 October 2026, built its page with Framer's own AI agent, and added the tag as shown here.

Framer's help on custom code names no plan for it (read 25 October 2026). Its pricing page says a custom domain needs a paid plan and calls the free plan ideal for non-commercial use. Basic is $10 a month and Pro $30 a month (framer.com/pricing, read 25 October 2026).

If Framer asks you to upgrade when you add the script, the tag needs a paid plan on your site.

Should the script go at the start of the head or the end of the body?

At the start of the head. Change Framer's default, End of <body>, to Start of <head>.

At the end of the body the tag runs after the page is drawn, and a page drawn before the tag runs stays as you built it for that visit.

On our published page Framer put its own meta tags and two short inline scripts first, then a comment, <!-- Start of headStart -->, then our tag. No stylesheet or outside script came before it, so the tag still runs before the page is drawn.

Paste the tag as given, without async or defer.

Should Run be Once or On every page visit?

Once. The tag follows Framer's page changes by itself.

Framer's help says Once adds and runs the code a single time, and On every page visit runs it each time someone visits a page.

A Framer site moves between its pages without a full reload. The tag notices each change and reads the new page, so it needs no reset call. On every page visit would run it again on each page change.

Will the tag break my Framer animations?

No. Rawuser writes into the page's own letters and words, so Framer's entrance animation plays on the new words.

On 29 September 2026 we tested a published Framer template, with our script added in our own browser only, and a lab page built the same way. The new words went in after Framer's code took over the page, and all 40 letters ended visible and animated. On the lab page, React threw no hydration error.

Words that Framer rotates on its own timer are left as you built them.

Does it slow my Framer site or move the design?

Only the lines Rawuser rewrites wait, usually a fraction of a second; if the answer is late, your original stays.

Search engines and AI crawlers get the page as built.

Can I use it with Framer's own A/B testing?

Not on the same headline. We have not tested the two together.

Framer's A/B testing is part of Convert, an add-on for sites on the Pro or Enterprise plan (Framer's help, read 25 October 2026). You design each variant, and Framer splits visitors evenly between them.

Keep a Framer test off the lines Rawuser rewrites, or run it on another page.

Does a security policy block the tag on Framer?

Not by default. The two published Framer sites we checked send no Content-Security-Policy (25 October 2026).

If you add a policy yourself, it needs https://edge.userawuser.com in script-src and connect-src. The Connect screen reads your policy and shows the exact lines.

How do I check it works?

Open the published page once, and within seconds the Connect screen says Tag found.

Framer does not run custom code in the editor canvas, so check it on the published site.

In the page source, look for <!-- Start of headStart --> near the top of <head>, with the tag on the next line.

In our install the Connect screen said Tag found within seconds, read the page and wrote a first version. Go live wrote the rest.

Sources

  1. Framer Help, How to add custom code read 25 October 2026
  2. Framer Learn, Custom Code read 25 October 2026
  3. Framer Academy, Add Custom Code to your site in Framer read 25 October 2026
  4. Framer, Pricing read 25 October 2026
  5. Framer Help, How to run an A/B test on your Framer site read 25 October 2026

Related questions

Start your pilot

See it on your site.

Free for 30 days. Leave your email and your page; we reply within a day with what your own page would say to a visitor from ChatGPT.

We use your email only to reply. Privacy

What happens next

  1. 01

    Within a day, your own page.

    What it would say to a visitor from ChatGPT, written from your page.

  2. 02

    We set it up with you.

    You see your page and its first version before anything goes live.

  3. 03

    Day 31, you decide.

    Keep it from $99 a month, or stop and owe nothing.